Ford 289 302 347 351 408 427 5.0 Mustang Aluminum Heads GT40 EFI carburetor 58CC

  

COMES WITH FREE 3/8 ROCKERS STUDS AND FREE GUIDE PLATES!!!!!!! These heads feature closed style 58cc combustion chambers and 190cc intake runners. In addition to the nearly 40lb weight savings these heads offer over factory cast iron heads, they will yield about a 45hp gain over stock E7TE castings. In unported form these heads will support 400+ horsepower on pump gas. If you are looking for a race grade head that is comparable to Edelbrock, Dart, Trick Flow and AFR at a fraction of the price look no farther then these.

These heads are machined and assembled by us, they work great on Carburetor and fuel injection applications!! The features of these are as follows. Heads are pressure cast from premium quality 2024 aluminum alloy. Unlike many inexpensive aftermarket heads that are sand cast these are cast in steel permanent type molds. This offers a stronger more durable cylinder head with consistent thickness throughout. 400 thick deck surfaces for maximum head gasket longevity. If you are running nitrous or a supercharger and have had problems with blown head gaskets and stock heads the thicker surfaces will virtually eliminate this problem. After machining the heads have magneese bronze valve guides installed along with stellite valve seats.

This is the best available combination for street use with unleaded gas. If you are racing the stellite valve seats offer much longer seat life then most competitors ductile iron valve seats.

Both the intake and the exhaust incorporate three angle valve seats to maximize both low and medium lift flow. The heads come fully assembled with 2.02 1 piece stainless steel intake valves and 1.60 exhaust valves. These Qual cast severe duty valves incorporate swirl polished heads and undercut stems. These heads require NO extra knotching or relieving for piston clearencing with stock or aftermarket pistons. Valve springs installed on these heads have 120Lbs closed pressure and will accommodate.

These will work fine with just about any hydraulic or solid flat tappet camshafts and roller camshafts. If you are using a Ford motorsport E, B or F camshaft these springs will work fine as well. Finishing off the heads are chromoly valve spring retainers and viton positive style valve stem seal. Cyclinder heads stud kits with washers and 12 point nuts.

232439450933 correct 351W 1/2 cyclinder heads stud kits adn washers and 12 point nuts. 372038104095 correct 3/8 flat guide plates. 142469376695 correct 5/16 raised guide plates.

232439037896 correct 1.5 stainless steel full roller rockers arms with a set of 16 poly locks. 232439453324 correct 7/16 in head x 3/8 for roller rocker arm screw in studs. 372038104087 correct 1.6 stainless steel full roller rocker arms with a set of 16 poly locks (35hp gain). W and mustangs GT40 and more!! Standard headers and intakes will fit fine. These heads have 1/2 inch head bolts so they can be used on 302 and 351 windor engines and more. During this time we have had a great deal of feedback from our customers, these heads have proven to be street tough and race durable.